Macrotech WPC Fencing installation precautions

　　Macrotech WPC Fencing, which is more and more like wood and better than wood, appears around you and me. In the park community, courtyard garden, road and riverside, it has won the public who love outdoor landscape with its excellent anti-corrosion and mildew effect and stable, non-fading and non-deformation quality.

　　So, when installing Macrotech WPC Fencing, what should we pay attention to?

　　1. When fixing the wood-plastic column, it is generally not recommended to directly embed it in the concrete. Instead, a galvanized square pipe slightly smaller than the diameter of the wood-plastic column, which is 1-2 mm, can be welded with the steel plate into an inverted T-shaped shape, and then fixed on the concrete floor with an expansion bolt; Then the wood-plastic column set; In addition, drilling screws can be used to rotate through the lining steel pipe at the waist of the wood-plastic column to ensure stability; The distance between the conventional plastic and wood columns (guardrail span) is about 1.5 meters, and should not exceed 2 meters as far as possible, so as to avoid safety risks due to excessive shaking of the span.

　　2. When connecting handrails with injection molded connectors, the elongated head should be used to avoid damage or damage to the injection molded parts due to the rotation of the drill bit during the installation of the connectors; The distance between wood plastic armrest, general control is left and right sides in 0.8 meters.

　　3. When connecting the small square column with the injection molded inner connector, make sure that the plastic and wood small square column is on the horizontal line, otherwise the overall beauty of WPC Fencing will be seen; The spacing of small square columns of wood and plastic is generally controlled within 0.2 meters.

　　4. When any wood-plastic profiles are connected, a gap of 2 mm must be reserved for heat expansion or cold contraction of the material.

　　The above is about macrotech WPC Fencing installation process matters needing attention, if you have this aspect of procurement needs, can call macrotech at any time to consult.

　　As one of the large-scale wood-plastic product research and development manufacturers in North China, Macrotech has been adhering to the product concept of "focus on quality, be consistent all the time" to ensure a high degree of stability of product quality and achieve the goal of "be consistent from the first board to the last board".